:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

RHMT DIY Hub Dyno?!?!? check it. (link)

Pages: [1]   Go Down

Author Topic: Waddup Douche Nozzles  (Read 6511 times)

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5882
  • Teh Secksy.....I has it
Waddup Douche Nozzles
« on: January 31, 2016, 12:59:23 PM »

So, with my job these days I have been crazy busy and no time for much of anything that isn't work.

I started towing nights and weekends to make some extra money on top of my full time day job. eventually they talked me into quitting the day job and towing full time.



Then they talked me into getting a class A license and towing big shit. This is my daily ride



My very first semi tow



Now some of the random shit I deal with on a daily basis



Load shifted and almost rolled over. Had to support it and winch it out at the same time





We are first responders for the fire department and train with them a couple times a year. I rolled this tanker truck while they worked to get a dummy out of a car under it



This thing had me doing wheelies all over the place. Luckily they are trading my truck in sometime in April and I'm getting a bigger truck



These suck horribly. The front bumpers are always super low so I have to get the tires up on blocks to be able to get my lift under them. Then you can only pick the front up a little bit cause the back is so low that it will drag the ground. They are also a bit longer and heavier than a normal semi.



Only time I have gotten to tow double trailers. Nothing real eventful there, its much easier to make turns than a standard semi



By far the heaviest and longest vehicle I have towed. Combined weight of that truck and mine was 147,000lbs and 130ft long




I daily a stock ass 2000 crv that I picked up cheap. Then recently picked up a theft recover gsr. I tuned the car for the kid, he moved to orlando where dudes will steal their mom's honda and it got stolen, gutted and left on a quiet street. He called me and said I could have the car free and clear if I picked it up that day. so I did and spent about 8 months piecing it back together with mostly shit I had laying around. It has a stock LS swap that I completely re-sealed and put ARP headstuds in. Threw a little turbonetics turbo on it with cast manifold and small front mount. It's just a street car, nothing fancy. Untuned on 10psi and street tires it went low 9's in the 8th. Gonna take it back tuned and on slicks one more time to see what it does, then just drive it while i work on other shit.

please ignore the rest. not mine





Lastly, a new business idea in the works. Suck Squish Bang Blow Clothing. SSBBClothing.com(Website not ready just yet)

https://www.facebook.com/SSBBClothing

Here are a few things I have been working on







Anyone get this from Top Gear?

Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

highroller54

  • I caught the fable Novacorn
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10830
  • Spreading the rhmt word like PB&J
Re: Waddup Douche Nozzles
« Reply #1 on: January 31, 2016, 01:05:33 PM »

Nice buddy! Good to see you check in
Logged
Xenocron is a piece of shit.

I solve my problems like an adult, at the strip club drinking on a work night. http://www.competitiondiesel.com/forums/images/smilies/turbo1.gif

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: Waddup Douche Nozzles
« Reply #2 on: January 31, 2016, 01:06:12 PM »

sweet man. interesting ass job for sure it looks like! liking the shirt ideas too.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5882
  • Teh Secksy.....I has it
Re: Waddup Douche Nozzles
« Reply #3 on: January 31, 2016, 01:22:10 PM »

Thank you sirs

Glad to get some feedback on the shirts that isn't people I actually know in person.
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: Waddup Douche Nozzles
« Reply #4 on: January 31, 2016, 04:07:05 PM »

Good seeing your still alive. I would like a suck bang blow plese!!
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5882
  • Teh Secksy.....I has it
Re: Waddup Douche Nozzles
« Reply #5 on: January 31, 2016, 04:27:01 PM »

Good seeing your still alive. I would like a suck bang blow plese!!

What color shirt? My current stock is black shirt with light gray background and white letters. I can get others though.


Oh wait..... I do t think I can help with the suck, bang, or blow if it's not a shirt.

Lol
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: Waddup Douche Nozzles
« Reply #6 on: January 31, 2016, 10:35:50 PM »

oh yeah, so whats up with the shirts? like cost? and what kind of shirt are they printed on?


suggestions:
honestly, your name is too big on the shirt.
put your name like the second pic, slightly smaller, up the seam, or across the bottom. plus im sure its cheaper/easier than doing both sides of the shirt.
use good hanes/fruit TAGLESS shirts, shit they are like 4-5bucks at walmart... the ones that i got from blipshift where on shit ass shirts. thin material (not really a bad thing if its used as undershirt) and shrunk up like a full size.
i like the suck squish bang blow...i suggested it about a year ago to blip, no love.... make a cool design that shows each cycle.
OH. im sure AJ wouldnt mind. but how about pic of the turbo with "i get blown daily"
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5882
  • Teh Secksy.....I has it
Re: Waddup Douche Nozzles
« Reply #7 on: January 31, 2016, 11:48:29 PM »

I have a roommate that works for a screen printer and get me gildan shirts for the dirty low. That's also how I'm doing this. I design and he prints. My business and I just pay for his labor.

I'm shooting for $15ea for the shirts. I'll see how that pans out as the orders happen

The black shirt I posted was my very first design.

I started playing with a design that shows each cycle the other day, but haven't found that magic formula that makes it work yet.

I like the blown daily idea. Could also work with superchargers.
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: Waddup Douche Nozzles
« Reply #8 on: February 01, 2016, 12:42:59 AM »



my thought was just the pistons, not so much the whole crankcase. then maybe offset?

[pic] suck
squish [pic]
[pic] bang
blow [pic]

more



^^those last two got a motoiq address, so Dave Coleman or Mike K probably had something to do with it. bonus.




this came up on my search too

pic is small




i am of course using these as a reference/ideas and am in no way saying to dead copy them. really though, they could be better for sure   :P
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: Waddup Douche Nozzles
« Reply #9 on: February 01, 2016, 02:22:34 AM »



Blown daily daily written across it please!! But put it on the back and maybe a the same thing on the front, but small and on the upper left chest area? Is that doable? If so I'll buy 2, XXL shirts.And what gildan shirts do you use? They have like 5 different kinds I belive. Also available in long sleeve?
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5882
  • Teh Secksy.....I has it
Re: Waddup Douche Nozzles
« Reply #10 on: February 01, 2016, 08:29:45 AM »

Lol, those are all pics I have been looking at off and on for days trying to come up with something. I'll figure something out soon.

I'll bring the "blown daily" to the top of the list and come up with something. I already have that shirt printed. I'd rather keep it as is and do a new design.
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6759
  • I look around and all I see is Smegheads
Re: Waddup Douche Nozzles
« Reply #11 on: February 01, 2016, 01:01:18 PM »

Maybe get Craig to send you some old Tuner Toys shirt pics.

Loved the "Get yourself Blown" shirt, but have your logo or RHMT logo the back.  :noel:

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: Waddup Douche Nozzles
« Reply #12 on: February 01, 2016, 01:02:13 PM »

Ok cool. Let us know what you come up with. I have a stack of shirts I've bought from nods over the years.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: Waddup Douche Nozzles
« Reply #13 on: February 01, 2016, 01:03:38 PM »

I thought it was great when Jeff got arrested at a hmt meet about 10 years ago and he was wearing the get yourself blown hoodie..lol
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

DSharp

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 407
Re: Waddup Douche Nozzles
« Reply #14 on: February 01, 2016, 07:21:15 PM »

I'd buy a few shirts, cuz that's how I roll
Logged
No escape from the mass mind rape

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: Waddup Douche Nozzles
« Reply #15 on: February 01, 2016, 08:37:57 PM »

Good update,  now DOWORK! 
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5882
  • Teh Secksy.....I has it
Re: Waddup Douche Nozzles
« Reply #16 on: February 01, 2016, 10:53:26 PM »

Thoughts?




« Last Edit: February 01, 2016, 10:59:33 PM by PhilStubbs »
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: Waddup Douche Nozzles
« Reply #17 on: February 01, 2016, 11:26:16 PM »

Not bad, any other turbo images? 
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5882
  • Teh Secksy.....I has it
Re: Waddup Douche Nozzles
« Reply #18 on: February 02, 2016, 08:31:13 AM »

I looked through a lot of google images for turbo ideas. That's where I ended up. Lol. Nothing else made sense for this use
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6759
  • I look around and all I see is Smegheads
Re: Waddup Douche Nozzles
« Reply #19 on: February 02, 2016, 10:01:56 AM »

What about a FAKLAD shirt?  :noel:

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5882
  • Teh Secksy.....I has it
Re: Waddup Douche Nozzles
« Reply #20 on: February 02, 2016, 04:27:16 PM »

I'm trying to avoid anything brand specific. I may do some small run stuff for here like that, but there are issues with using brand images and things. The guy I have actually printing my shirts got hit with a $500 bill from Honda for making shirts that said civic and crx on them.
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

colt45

  • Mista Pimpsta
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8992
Re: Waddup Douche Nozzles
« Reply #21 on: February 20, 2016, 02:42:35 AM »

Phil, I thought you were a mill technician

mandrel-bends

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 334
    • Columbia River Mandrel Bending
Re: Waddup Douche Nozzles
« Reply #22 on: February 20, 2016, 05:27:30 PM »

LOL




By far the heaviest and longest vehicle I have towed. Combined weight of that truck and mine was 147,000lbs and 130ft long

Logged
Columbia River Mandrel Bending
CNC Mandrel Bending &ampamp Precision Waterjet Cutting
http://www.mandrelbends.com

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5882
  • Teh Secksy.....I has it
Re: Waddup Douche Nozzles
« Reply #23 on: February 24, 2016, 01:50:42 PM »

Phil, I thought you were a mill technician


I have spent most of my adult life working on planes. One of my first jobs was in a machine shop making parts for Airbus, but that was 15 years ago
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

BoostedSchemes

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 18561
  • ☂BloodRaincoat☂
Re: Waddup Douche Nozzles
« Reply #24 on: March 01, 2016, 11:57:11 PM »

more felatijokes on shirts the people want more
Logged
All posts before 8am and after 3pm are produced under the influence of alcohol.


Major Loser, please tell me how to be smart and interesting like you~

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: Waddup Douche Nozzles
« Reply #25 on: March 02, 2016, 06:52:09 PM »

Anyone from this site that wears a shirt with BBC on it is a fag except BlackDragon.
Logged
92GSR - mild interest

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6759
  • I look around and all I see is Smegheads
Re: Waddup Douche Nozzles
« Reply #26 on: March 03, 2016, 10:23:45 AM »



One of my favorite shirts

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5882
  • Teh Secksy.....I has it
Re: Waddup Douche Nozzles
« Reply #27 on: March 03, 2016, 01:57:21 PM »

Hmmm maybe I'll try to do something with that. I'm not printing images like that one dude here, only screen printing. So the idea will have to be altered to work
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.
Pages: [1]   Go Up