:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Got video of your car doing rippers or dirty 2/3rds? post them up! (link)

Pages: [1] 2 3 ... 10   Go Down

Author Topic: 1991 Galant VR-4....forged 2.4L, AWD, T67, etc.... ****SOLD****  (Read 62788 times)

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
1991 Galant VR-4....forged 2.4L, AWD, T67, etc.... ****SOLD****
« on: January 16, 2012, 07:46:36 PM »

ok im sure if you have been in the chat you have heard me talk about it. well here it is...

1991 Mitsubishi Galant VR-4 #613/2000. for those that dont know, just 3000 of them 2000 in 91, another 1000 in 92. AWD, turbo, 4G63, 4WS, etc.... its like an EVO, before there where EVO's... (Mitsu wanted to rally, so they made the Galant AWD, then used the Lancer Evolution after)... its NOT a DSM. DSM refers to Eclipse/Laser/Talon clusterfuck with Chrysler cuz they couldnt build shit on there own. this is all Mitsubishi.

it has a 6 bolt 4g63 (non-crankwalk), and a 3 bolt rear (weaker)


mods so far:
removed emissions
EVOIII manifold   (with new EVO3 turbo gasket, new EVO8 manifold gasket)
FP Red turbo (ported)      
Tial 38mm WG   (open dump)
some baller ceramic o2 housing    (forgot from where)
3" china downpipe      
'turbohf' 3" exhaust
Magnaflow muffler (12219)    
1g valve      
'turbohf' 3" intake
K&N 3" filter
PLX M300 wideband
ACT 2600   clutch
Fidanza flywheel
1g shift boot
'turbohf' shifter
Skunk2 10th Anniversary knob

shit i have, and need to install:
MAF Translator   (what i will be "tuning" this with for now)
3" GM MAF
680cc injectors    
Denso/Supra pump (rewired)   
IndyRacecore/Spearco 2-216 intercooler
'turbohf' chargepipes
RacingHart Type-C2 wheels


shit i still want:
everything else LOL...
4bolt rear
forged 2.4L
real tuning shit (evo8 ecu? or ecmlink?)
EVO8/9 MR/SE seats
lower this tank on some EVO suspension or coilovers
MOMO steering wheel
E85 w/HiProfile injectors


CURRENT MODS LIST:

engine:
G4CS 2.4L block
OEM 100mm crankshaft
Eagle rods (stock length)
Wiesco pistons (86.5mm, 8.8:1cr)
1g/6bolt turbo head w/mild port
Si Valvesprings/retainers
ForcedPerformace 'FP2' 272/272 cams
Cometic Headgasket .051"
ARP Headstuds
Blanceshafts removed
EGR removed/blocked off
emissions thrown away
FICV blocked off
SS braided oil line kit
94 Galant GS cam gears

turbo:
EVOIII manifold         
Forced Performance "Red" turbo (ported)         
OEM EVOIII turbo gaskets
OEM EVO8 manifold gasket
TiAL 38mm WG (open dump)
baller ceramic coated o2 housing (forgot brand)      
3" 1g china downpipe         
turbohf 3" exhaust
Magnaflow muffler (11219)    
turbohf 2.5" charge pipes   
IRC/2-216 intercooler   
TiAL 50mm bov      
turbohf 3" intake
K&N 3" filter

fuel:
AEM EMS 30-1300 'series 1' (SD config)
DSMLink v2.5...ECMLink v3
91 EEPROM ECU
GM 3" MAF
GM 4bar MAP sensor
GM Intake Air Temp sensor
turbohf Speed Density harness
PTE 1000cc injectors    
Denso/Supra pump (rewired)   
PLX M300 wideband
Turbosmart 30/30 boost gauge
Turbosmart MBC

tranny:
1g DSM (minty)
ACT 2600   
Fidanza flywheel      

other:
1g DSM radiator
group 151 battery
 
interior:
1g DSM boot
turbohf custom shifter
Skunk2 10th Anniversary knob
fixed seatbelts/door chime (aka unplugged)

suspension/exterior:
Konig Feather 16x7 et40?
EVO IX GSR Struts/shocks (turbohf modified)
EVO IX front springs ('trimmed')
Suspension Techniques (ST) rear lowering springs
93 headlights




PICS!!!!!!!!! (old)












random:




^gay ass stock intake arm... mine was way simpler of a setup.

^weak ass 1g shorter shifter everyone puts in these things SUCKS, so i hacked up the Galant one. for what i call the perfect height (stock Galant was about 1.5inch taller than mine), bent towards me (instead of the stock away) and now uses a 10x1.5 knob (like a Honda)... its cleaned up and black now.




think thats all for now... come back later for more lol...  :Jew:
« Last Edit: July 10, 2017, 05:11:35 PM by turbohf »
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #1 on: January 16, 2012, 07:52:06 PM »

to bad its a dsm :P

You didnt post pics of the baller wheels?
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #2 on: January 16, 2012, 08:06:01 PM »

to bad its a dsm :P

You didnt post pics of the baller wheels?

i knew that shit was coming before i even clicked on this....wait, im a global mod now, i can fix that :P


oh yeah...



RacingHart Type C2... 17x7.5 (im told) 3 piece. not sure on the offset. about 38-40et im guessing... judging by the casting marks on the back, circa 1999.  :noel:
these will be painted to mimic the stock wheels (pull the centers/caps and painted Belize Green). then probably get some 225/40's, cuz these 205/40s hopefully smoke up ;)
« Last Edit: January 16, 2012, 08:57:48 PM by turbohf »
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

Ntrain2k

  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3014
    • Zeus E-Juice Premium E-Liquid
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #3 on: January 16, 2012, 08:10:53 PM »

Intercooler?
Logged
http://bit.ly/TYRevB  If you vape, you have to try Zeus E-Juice

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

Ntrain2k

  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3014
    • Zeus E-Juice Premium E-Liquid
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #5 on: January 16, 2012, 08:22:40 PM »

feck I'm blind
Logged
http://bit.ly/TYRevB  If you vape, you have to try Zeus E-Juice

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #6 on: January 16, 2012, 08:28:32 PM »

Intercooler?


IndyRacecore/Spearco 2-216 intercooler


it has a fmic stock... if you wanna call it that. its like a mk3 supra one, but 1/2 the size. looks like an oil cooler LOL...

its cold as ballz outside, and snowing. also missing a BOV flange, and at least 1 coupler i need. shits backordered/lazy to find one. so i should get that shit figured out in the next week or 2, and fabbed/installed. ill go out an take a pic of this thing tho. ballin.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6759
  • I look around and all I see is Smegheads
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #7 on: January 16, 2012, 08:32:35 PM »

I have two of those old Supra intercoolers if ya want one.  :noel:

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #8 on: January 16, 2012, 08:55:15 PM »

ok... 3 intercoolers.

IndyRaceCore/Spearco 2-216
idk intercooler that was on my 400whp B16A screamer
EMUSA chinacooler off the ITR/CRX (300whp)



2-216 core measures: 24x10.5x3.5  :o
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

chris

  • Guest
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #9 on: January 16, 2012, 09:13:31 PM »

go score a throttle body at the j yard and send it in would like to get my fixture set up for some dsm stuff


Lets trade some stuff for labor sir :)
Logged

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #10 on: January 16, 2012, 09:19:31 PM »

probably not going to touch the motor. i might put some HKS272's in it. but we will see how fast i can get this thing moving.

when/if i build a 2.4 tho. probably will need a ported TB, ported intake, etc.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #11 on: January 16, 2012, 09:32:41 PM »

About damn time! Those tb are small as fuck upgrade that shit.
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

snm95ls

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3662
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #12 on: January 17, 2012, 03:13:54 AM »

Does like.

Cmak

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 63
  • RHMT
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #13 on: January 17, 2012, 04:08:12 PM »

Its a 60mm TB, I don't know why thats considered small, people have made 500whp on them.
Logged
I just saved a bunch of money on my car insurance by fleeing the scene of the accident.

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #14 on: January 17, 2012, 04:23:50 PM »

Because most of the honda rhmters run a 68 - 74mm throttle body. Or a stocker that has been over bored by chris m
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

JACER63

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 167916
  • well shit..
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #15 on: January 17, 2012, 08:14:47 PM »

looks like a fun dd. will you be bringing this to the meet? deff needs some stance work and wheels..

Minor Threat

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2401
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #16 on: January 17, 2012, 10:22:35 PM »

You can tell yourself it's not a DSM all you want, it's still a Mitsufeces.
Logged
"quotquotand the welds look like a pigeon had 1 too many chili-dogs, whoever built them needs to go throw their tools in the ocean."quotquot

www.facebook.com/enhancedautoperformance

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #17 on: January 17, 2012, 11:30:31 PM »

looks like a fun dd. will you be bringing this to the meet? deff needs some stance work and wheels..

yeah, i will probably bring this to the meet. would like to bring the CRX also. and maybe a Hyundai with a turbo swap  :mexi:

GVR4 will be getting the wheels above. PROBABLY with the centers/caps color matched to the car. and some 225-45-17 tires. lowered on something... RHMT EVO IX suspension, or taiwanese coilovers unless i can find some baller USA/JDM coilovers for jew'ness.

CRX will hopefully be on some 16" TE37's before spring, and have a RHMT'ed A6 swap... i dont promise that tho lol... (the showing up, wheels, or running)

You can tell yourself it's not a DSM all you want, it's still a Mitsufeces.

as long as we are clear that Chrysler had no part in this.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

Minor Threat

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2401
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #18 on: January 18, 2012, 12:08:45 PM »

looks like a fun dd. will you be bringing this to the meet? deff needs some stance work and wheels..

yeah, i will probably bring this to the meet. would like to bring the CRX also. and maybe a Hyundai with a turbo swap  :mexi:

GVR4 will be getting the wheels above. PROBABLY with the centers/caps color matched to the car. and some 225-45-17 tires. lowered on something... RHMT EVO IX suspension, or taiwanese coilovers unless i can find some baller USA/JDM coilovers for jew'ness.

CRX will hopefully be on some 16" TE37's before spring, and have a RHMT'ed A6 swap... i dont promise that tho lol... (the showing up, wheels, or running)

You can tell yourself it's not a DSM all you want, it's still a Mitsufeces.

as long as we are clear that Chrysler had no part in this.

What you're really not getting is that Chrysler wasn't the problem with DSM...
Logged
"quotquotand the welds look like a pigeon had 1 too many chili-dogs, whoever built them needs to go throw their tools in the ocean."quotquot

www.facebook.com/enhancedautoperformance

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #19 on: January 29, 2012, 06:32:38 PM »

fuckme...



 :mexi: :mexi: :mexi:




ok. its gonna need some bigger tires forsure. and lowered 3inches.... fuck. im broke. spent all my money...
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

theidealone

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 670
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #20 on: January 29, 2012, 08:26:54 PM »

Those look sick! Thank you for not painting them yet. LOL. Just needs a drop, and youre good to go.
Logged

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #21 on: January 29, 2012, 08:32:38 PM »

ehh, still not my style. but it does look good aside from the  :mexi:  status. watching CL right now. think i found some 225-45-17 bridgestones for 150bucks used, 7-8/32... for the 4... the tires on the wheels are minty fresh 205-40-17s... just too small. little shorter than the stock wheels/tires (195-60-15). would be nice to have tire little larger, and definitely wider.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #22 on: January 30, 2012, 12:49:48 AM »

Those look pretty good. Needs more sidewall and a drop!
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #23 on: January 30, 2012, 12:56:22 AM »

working on the drop. i grabbed that stock EVO IX suspension from my buddy. really looks like it has 57miles on it too lol. now just needs to not rain tomorrow, then i can cut it up.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #24 on: January 30, 2012, 01:36:01 PM »

Those look pretty good. Needs more sidewall and a drop!
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #25 on: February 18, 2012, 10:32:41 PM »

so i got a promotion of sorts at work, and i work mon-fri now. so i was able to sneak my car in the shop at work today lol. did the suspension. the guys on the GVR4 forum have done this many times. im using 57mile '06 EVO IX GSR stock suspension. i cut about 1.5 coils off the front. swapped the Galant top hats to the front. the rear i cut the stock bushing off the Galant shock, and welded it to the EVO shock... RHMT yo!  it rides nice and stiff...kinda like an EVO  ::)


pics:

mid process, just the fronts



pulled it out back to get a decent pic.

i had one of the guys there help me align it real quick. he sets it up then goes "YES!... i dont have to align the rear!" lol. referring to the AWS setup.
got like -.5-.7 camber on the fronts i think. dont recall the rears. drives nice tho. needed aligned even at stock height really.

yes, i realize i could probably use a coil cut out the rear also. but i was running low on time, didnt feel like fuckin with it anymore...


thats all for today. i might work on some fuel/tuning/intercooler shit tomorrow... might. its probably going to rain, then ill bitch out... unless i can push the CRX far enough forward in the garage to sneak the bumper inside?... mmm...
 
 
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

HiProfile

  • Certified OG
  • *****
  • Online Online
  • Posts: 4564
  • Injector Kingpin
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #26 on: February 19, 2012, 03:14:06 PM »

I actually like the rake it has now. But it will probably get aid in front traction with stiffer rear springs. I'd just leave it as-is.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #27 on: February 19, 2012, 03:49:06 PM »

I actually like the rake it has now. But it will probably get aid in front traction with stiffer rear springs. I'd just leave it as-is.

well, we will see how it looks on the new wheels. with the OEM;s in place i dont mind the look. and im too lazy to change. but with the new 17s and lowpro tires? might need lowered some more in the back. i cant lower the front anymore as there is no more tension on the spring lol. i might get some custom GC sleeves/springs. but asis im fine.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

shogun

  • Full Member
  • ***
  • Offline Offline
  • Posts: 225
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #28 on: February 19, 2012, 03:59:00 PM »

the car is looking amazing, can any suspension kit can be used in old galant, ill sell my cusco coil overs to a friend for his vr4, they were in a evo 5 though
Logged

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: turbohf ~ new daily/project... 1991 Galant VR-4...
« Reply #29 on: February 19, 2012, 05:42:49 PM »

the car is looking amazing, can any suspension kit can be used in old galant, ill sell my cusco coil overs to a friend for his vr4, they were in a evo 5 though

thanks.

i think that all the EVO suspensions have the same problem. plus you cant use the EVO camber plates unless you redrill the body for the different pattern.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'
Pages: [1] 2 3 ... 10   Go Up