:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Got video of your car doing rippers or dirty 2/3rds? post them up! (link)

Pages: [1] 2 3 ... 12   Go Down

Author Topic: Civic build- 840whp/590tq on 48lbs falling off hard.  (Read 83939 times)

narfdanarf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 341
Civic build- 840whp/590tq on 48lbs falling off hard.
« on: April 02, 2010, 12:24:19 AM »

Working on my 99 civic.  Old setup was a 57 trim on a stock sleeve b16 with cp pistons/eagle rods, precision intercooler, made around 450whp on 23lbs, don't know what it was at on 30lbs, but it was significantly faster.  Got bored one night and tore it down.  Easily the worst mistake i've ever made in my life.  While it was in 1k pieces in my garage I was browsing H-T and came across a bunch of dudes parting out there baller shit for cheap because they realized they could'nt afford to have a race car.  So I ended up making the 2nd biggest mistake of my life and bought all of it for a fwd econocar that I completely hate.  It's starting to come together though and should be running by late april/beginning of may.  I will probably document the rest of the build on here as long as I don't get banned. 

This is the car before I tore it down to hell and ruined it further.


« Last Edit: July 01, 2010, 01:03:51 AM by narfdanarf »
Logged

narfdanarf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 341
Re: Civic build.
« Reply #1 on: April 02, 2010, 12:29:30 AM »













Logged

narfdanarf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 341
Re: Civic build.
« Reply #2 on: April 02, 2010, 12:39:07 AM »









Putting the bottom end together







Logged

narfdanarf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 341
Re: Civic build.
« Reply #3 on: April 02, 2010, 12:47:42 AM »

Got some skunk2 pro1's for $200 on hater tech so I decided to check v2v clearance with them.  I have .5mm o/s valves in my head so I thought it might be prudent.  Turns out it was definitely a good idea I needed at least 2 degrees separation to have .030 clearance v2v which is probably not enough and too much separation for what pro1's normally degree in at.  So I sold them for $350 and ordered a set of custom cams from webcams.  They are supposed to be here wednesday and I'll do this shit all over again.







Logged

narfdanarf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 341
Re: Civic build.
« Reply #4 on: April 04, 2010, 03:55:37 AM »

Worked on sumping my gas tank today.

Cut out random pattern of metal you guesstimate will work.



Grind off nasty black shit and cut holes.  Don't forget to wash out all the shavings and shit, I used a couple magnets to help get everything out.



Test fit your sump



Commence to attaching like metals via your preferred method



See what the shit's gonna look like when done



Logged

speedjunky01

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1015
Re: Civic build.
« Reply #5 on: April 04, 2010, 01:29:35 PM »

Wth is the point of the sump settup? Walbro 255 with upgrade wires will more then do the job
Logged

narfdanarf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 341
Re: Civic build.
« Reply #6 on: April 04, 2010, 01:32:57 PM »

orly?  What job is that?
Logged

speedjunky01

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1015
Re: Civic build.
« Reply #7 on: April 04, 2010, 01:34:48 PM »

Either way nice ass build need more jb weld
Logged

dvst8r

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3737
  • Unobtainium
Re: Civic build.
« Reply #8 on: April 04, 2010, 01:47:12 PM »

Wth is the point of the sump settup? Walbro 255 with upgrade wires will more then do the job

1 walbro feeding an S372? Yeah I don't think so.

Looks like narfdanarf has it under control. 
Logged
There are two kinds of people: Sheep and sharks. Sharks are winners and they don'#039#039t look back '#039#039cause they don'#039#039t have necks. Necks are for sheep.

Minor Threat

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2401
Re: Civic build.
« Reply #9 on: April 04, 2010, 02:56:46 PM »

I feel your pain.
Logged
"quotquotand the welds look like a pigeon had 1 too many chili-dogs, whoever built them needs to go throw their tools in the ocean."quotquot

www.facebook.com/enhancedautoperformance

narfdanarf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 341
Re: Civic build.
« Reply #10 on: April 05, 2010, 01:14:26 AM »

Got the tank mounted and recoated with that 3m rubberized undercoating shit.



Thursday the rest of my fuel system, the ignition and my intercooler core will be here.

Things left to do:
Replace knuckles with DSS version
Plumb fuel to/from engine bay
Install coilovers
Degree cams and drop motor in
Build intercooler
Build manifold
Wire ignition up.
Tune and 5th gear ripper vid
Logged

speedjunky01

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1015
Re: Civic build.
« Reply #11 on: April 05, 2010, 09:31:44 AM »

Tune and 5th gear ripper vid

 :o epic
Logged

SOHCKLR657

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 420
  • D-Series 10LBS Will Turn Ya Out!
Re: Civic build.
« Reply #12 on: April 05, 2010, 09:44:41 AM »

 :noel: I like the ride, solid  :yes: Keep it up
Logged

Holy mother of all that is cheesy and burgery, Sohclikr... YOU ARE A FAT FUCK YOU FAT FUCK.

 88 4DR DX... You Will See... D15B Powered Where'#39#39s My Powder, Come On Wit It! http://www.quizmasters.biz/Pub%20Genius/Mr_Men/Characters/Mr%20Rude_01.png

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: Civic build.
« Reply #13 on: April 05, 2010, 09:55:56 AM »

Fucking pimp. Whos tuning it?
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: Civic build.
« Reply #14 on: April 05, 2010, 11:02:43 AM »

Looks good man. Are you another NW nog? I sware I have seen your car at bremerton raceway b4. This thing is gona be a beast of a build!!
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

narfdanarf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 341
Re: Civic build.
« Reply #15 on: April 05, 2010, 11:19:47 AM »

Yeah I'm from Bremerton, went out to bremerton raceway a couple times a few years back and first time I was having boost leak problems, and then the 2nd time I kept hitting boost cut at 31lbs, so I never got a clean pass in. Did run like 12.0@120 on spring pressure like 14lbs.
Logged

narfdanarf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 341
Re: Civic build.
« Reply #16 on: April 05, 2010, 11:22:18 AM »

Fucking pimp. Whos tuning it?

James at Speedfactory will probably be tuning it.  Right now I'm still on stock tranny I plan to just turn it up on the dyno till the tranny goes, then I have a backup tranny to throw in and drive it around on.
Logged

malichite

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1988
  • Harbor Freight Ninja!
Re: Civic build.
« Reply #17 on: April 05, 2010, 11:29:25 AM »

Yeah I'm from Bremerton

Fucking pimp.  I want to come see this beast!
Logged
You hhave just failed on so many levels, im waiting for someone else to verbally slap you in the gooch with a mallet

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: Civic build.
« Reply #18 on: April 05, 2010, 11:42:15 AM »

I know ive seen that care somewhere b4. I was there I think you were there with the wife and the kid.

Only pass I saw you run was like a 14.XX @ 65mph.....lol

I think you let off at half track, But this was like 2 years ago. I was breaking my motor in out at the tranck, and smoking the two fags that were there in ther yellow typ harrs! LOL Good to see another nog on this side of the pond. Im up in Poulsbo, and Malichite is down in Port Orchard, and Kenn Rogers is out in bremerton too. Hit me up if you need help throwing shit together or what not!


NOG
A.J.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

malichite

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1988
  • Harbor Freight Ninja!
Re: Civic build.
« Reply #19 on: April 05, 2010, 12:07:48 PM »

Hit me up if you need help throwing shit together or what not!

X2.  Nice seeing Nigs on this side of the water.  I was going to say if you need any welding done let me know but looks like you got that covered :D
Logged
You hhave just failed on so many levels, im waiting for someone else to verbally slap you in the gooch with a mallet

narfdanarf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 341
Re: Civic build.
« Reply #20 on: April 05, 2010, 12:32:47 PM »

I'll be working on it pretty much nonstop this weekend except saturday morning I'm going to be attending a tuning session for a crx I helped build for another dude in bremerton. My # is 304-615-4140 if you guys want to pop over this weekend.
Logged

malichite

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1988
  • Harbor Freight Ninja!
Re: Civic build.
« Reply #21 on: April 05, 2010, 01:22:43 PM »

I'll be working on it pretty much nonstop this weekend except saturday morning I'm going to be attending a tuning session for a crx I helped build for another dude in bremerton. My # is 304-615-4140 if you guys want to pop over this weekend.

Hells yeah.  You tuning on a dyno?  If so which one?
Logged
You hhave just failed on so many levels, im waiting for someone else to verbally slap you in the gooch with a mallet

narfdanarf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 341
Re: Civic build.
« Reply #22 on: April 05, 2010, 07:35:37 PM »

It will be at Speedfactory, I know enough about tuning to get into some serious trouble, so I leave that shit to people who've done it for awhile.  It's basically a copy of my old setup minus he is doing the ls/vtec thing and I did sort of a long runner mini-me manifold for him.  I think his goals are like 450whp on pump.
Logged

bigdaddyvtec

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8948
  • Go outside and play hide and go fuckyourself
Re: Civic build.
« Reply #23 on: April 05, 2010, 10:19:29 PM »

sweet buttsex
Logged
http://i256.photobucket.com/albums/hh166/joeymisanthropy/Misce/TURBOTHIS.jpg

H series 35 pounds... Will turn you out!
 ---GFI we build FAST---

SloS13

  • RHMT Ex-President
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: I am a geek!!
  • My avatar is broken
Re: Civic build.
« Reply #24 on: April 06, 2010, 10:37:20 AM »

nice nice nice  :D
Logged

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: Civic build.
« Reply #25 on: April 06, 2010, 11:31:41 AM »

Nice build!

Clean car!

Boobies!
Logged

highroller54

  • I caught the fable Novacorn
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10830
  • Spreading the rhmt word like PB&J
Re: Civic build.
« Reply #26 on: April 06, 2010, 02:28:02 PM »

I like this twig twirler  :yes:
Logged
Xenocron is a piece of shit.

I solve my problems like an adult, at the strip club drinking on a work night. http://www.competitiondiesel.com/forums/images/smilies/turbo1.gif

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: Civic build.
« Reply #27 on: April 06, 2010, 02:40:40 PM »

Nice setup, can't wait to see it finished. Hope you run some good numbers. And you could teach buk a few things about welding it looks like.
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

HiProfile

  • Certified OG
  • *****
  • Online Online
  • Posts: 4564
  • Injector Kingpin
Re: Civic build.
« Reply #28 on: April 06, 2010, 10:04:41 PM »

Putting the bottom end together


That's about the only thing I don't approve of. Bare hands + carpet/dust + bearings don't mix. Otherwise I like the fact you're doing it all yourself. Having a pro tune it isn't a bad idea at the 400+ level.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

narfdanarf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 341
Re: Civic build.
« Reply #29 on: April 07, 2010, 12:51:39 AM »

I understand your concerns, but nearly the entire room had a sheet of painters plastic on the floor, and I don't wear gloves because I hate not being able to feel anything.  With that being said i'm sure I'll fucking spin a rod bearing at 11,000 rpm because a piece of carpet is stuck to inside of one of my crank journals, in which case you can punch me in the face and stomp on my balls.

I'm glad people aren't shitting on me for taking it somewhere else to get it tuned.   I concur with the 400+ thing, which is why I'm taking it to James since I am hoping to make well over 2 times that, and I've heard lots of good things about leed, but I have no idea how to get ahold of the man, and i don't feel like waiting.
« Last Edit: April 07, 2010, 12:56:08 AM by narfdanarf »
Logged
Pages: [1] 2 3 ... 12   Go Up