:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: 94EGCoopey on December 14, 2015, 01:29:17 PM

Title: IS300 Partout Thread
Post by: 94EGCoopey on December 14, 2015, 01:29:17 PM: So, for starters, this will probably be parted out before finished. DONT GET YOUR FUCKING HOPES UP.

I sold off my AWD 5spd CRV and Turbo Integra and upgraded to an '04 5spd IS300.

I found it on Craigslist in DC. Drove 4.5hrs up to get it. This is the night I bought it:

(https://scontent-atl3-1.xx.fbcdn.net/hphotos-xlp1/v/t1.0-9/12063398_10156036470085431_6570359978657091306_n.jpg?oh=2c0b654a16aff253e1c1f184adce438f&oe=571A1309)

Already had suspension and shit so I needed some wheels. Im broke as f and piecing a turdbo setup for this so this is what you get. FUCK YOU.

(https://scontent-atl3-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/12239471_10156170438655431_6615798550207080985_n.jpg?oh=07ac2ab0a0f57e25708fb9aeec0f61e6&oe=56DD3C53)

(https://scontent-atl3-1.xx.fbcdn.net/hphotos-xfp1/t31.0-8/12314479_10156239202660431_5712815270781889541_o.jpg)

(https://scontent-atl3-1.xx.fbcdn.net/hphotos-xlp1/v/t1.0-9/12360173_10156246135780431_3366613669308767613_n.jpg?oh=73e927d7b4003332866c7f679a11ff11&oe=571E0474)

Then the good shit:

(https://scontent-atl3-1.xx.fbcdn.net/hphotos-xtf1/t31.0-8/12304501_10156246035490431_7963525509826328825_o.jpg)

Turbo is a Garrett GT35R.

Manifold is CXRacing

Tial 44mm Gate.

Tial BOV.

Paid $300 for the Tial Shit.

Paid $300 for the manifold. Was BNIB.

Got the turbo for free. :)

So, who needs IS300 parts?
Title: Re: IS300 Partout Thread
Post by: Rioreded6 on December 14, 2015, 01:48:13 PM: Shouldn't you post this in the for sale thread?
Title: Re: IS300 Partout Thread
Post by: turbohf on December 14, 2015, 02:03:05 PM: he lasts between a week and a month before he parts his builds or sells them. so think he is just wetting a jump on the thread title lol.
Title: Re: IS300 Partout Thread
Post by: 94EGCoopey on December 14, 2015, 02:29:30 PM: Smh...

For those that missed it, /s.

ps. The Integra made it almost a year, dick.
Title: Re: IS300 Partout Thread
Post by: turbohf on December 14, 2015, 03:03:22 PM: :-*
Title: Re: IS300 Partout Thread
Post by: ratcityrex on December 14, 2015, 04:49:36 PM: Sell all of it and do a turbo lsx swap into it.
Title: Re: IS300 Partout Thread
Post by: 92CXyD on December 14, 2015, 05:45:23 PM: I see this car and I remember EPIC turbo build on the cheap with Yuri and the crazy shit on Altezza forum. :noel:
Title: Re: IS300 Partout Thread
Post by: turbohf on December 14, 2015, 06:53:37 PM: Quote from: ratcityrex on December 14, 2015, 04:49:36 PM
Sell all of it and do a turbo lsx swap into it.

there are a couple over on ls1tech...
Title: Re: IS300 Partout Thread
Post by: 94EGCoopey on December 15, 2015, 07:26:37 PM: Ew fuck that noise. 2j ftw!
Title: Re: IS300 Partout Thread
Post by: ratcityrex on December 16, 2015, 01:37:48 AM: Only if you want to dump lots of money into it and make half the power then sure. Put a stock boosted lsx in there and make 700whp all day on pump gas. And be out less then 3k.
Title: Re: IS300 Partout Thread
Post by: 94EGCoopey on December 16, 2015, 12:08:47 PM: Goal for this project isnt how much power.

I want to keep as much of the OEM functions as possible with 500hp goal. So far, I am well under $3k. Total with trans swap, I should be around $3500-4000.
Title: Re: IS300 Partout Thread
Post by: ratcityrex on December 16, 2015, 12:56:16 PM: But it's still gay.......lol lsx swap everything!!
Title: Re: IS300 Partout Thread
Post by: 92CXyD on December 16, 2015, 01:45:02 PM: Quote from: 94EGCoopey on December 16, 2015, 12:08:47 PM
Goal for this project isnt how much power.

I want to keep as much of the OEM functions as possible with 500hp goal. So far, I am well under $3k. Total with trans swap, I should be around $3500-4000.

Get Yuri to fly in and boost hat for cheap, have bottles of vodka at the ready :noel:
http://www.realhomemadeturbo.com/forum/index.php/topic,13122.msg141348.html#msg141348 (http://www.realhomemadeturbo.com/forum/index.php/topic,13122.msg141348.html#msg141348)
Title: Re: IS300 Partout Thread
Post by: Phate on January 02, 2016, 07:04:46 PM: Quote from: 92CXyD on December 14, 2015, 05:45:23 PM
I see this car and I remember EPIC turbo build on the cheap with Yuri and the crazy shit on Altezza forum. :noel:

That thread was absolute gold.

I really like these, was trying to find one with not-stupid mileage and a manual before I got the subaru. I want one with a 1UZ-FE.