Topic: my boosted SI (B!6a) (Read 5782 times)

boosted 00 black si · « **on:** July 13, 2009, 06:14:25 PM »

this is my boosted 2000 civic si this car has been turbo for bout three years now the first turbo set up was a ramhorn set up with a t3/to4e turbonetics got tired of that and decided to go with a top mount this is my everyday car here is the set up

motor
stock rebuilt type r head
b16a 81.5mm decked
probe forged piston n probe h beam rods
micro polished and balanced crank
560cc evo injectors
aeromotive fpr
walbro fuel pump
-6 fuel lines
earls inline fuel filter
gsr cam
aem gears
aebs intake manifold
type r throttle body
moroso catch can set up
aem wideband
autometer oil n boost n volt
msd blah blah

b16 trans obx lsd
act hd pressure plate act 4 puck clutch

turbo set up
top mount turbo manifold
60-1 turbo a/r 70 intake a/r 63 exhaust rebuilt by blaast
synapse 50mm wastegate
tial 50mm bov
big ass egay intercooler 2.5 ic piping all round
3 inch exhaust from turbo all the way back
mbc

suspension
kyb agx struts
skunk 2 coilovers
19mm rear sway bar
black blox lower control arms

car made 385hp and 250 torque on 16psi on pump tuned by xenocron
i'll be hitting the dyno again in aug trying to crack 500hp

pics
just picked these bronze flowers up for 200 bucks with brand new tires
i

crxvtec91 · « **Reply #1 on:** July 13, 2009, 06:49:51 PM »

Looks good as always. I think you next upgrade should be to send off your intakemanifold to Chris M and pick up a 74mm Tb; would make getting to 500hp easier.

boosted 00 black si · « **Reply #2 on:** July 13, 2009, 07:03:21 PM »

yea thats was my plan to do next ;D along with some meth right now i got the car up to 20psi so its prob pushing over 400 now

speedjunky01 · « **Reply #3 on:** July 13, 2009, 07:34:41 PM »

Quote from: boosted 00 black si on July 13, 2009, 06:14:25 PM

car made 385hp and 250 torque on 16psi on pump tuned by xenocron
i'll be hitting the dyno again in aug trying to crack 500hp

was looking good until . . .

boosted 00 black si · « **Reply #4 on:** July 15, 2009, 04:10:26 PM »

Quote from: speedjunky01 on July 13, 2009, 07:34:41 PM

Quote from: boosted 00 black si on July 13, 2009, 06:14:25 PM

car made 385hp and 250 torque on 16psi on pump tuned by xenocron
i'll be hitting the dyno again in aug trying to crack 500hp

was looking good until . . .

haha

boosted 00 black si · « **Reply #5 on:** July 20, 2009, 08:23:55 AM »

update

just broke my act heavy duty pressure plate
picking up a lsd set up this week

AJxr · « **Reply #6 on:** July 21, 2009, 06:50:56 PM »

is that an obx top mount?

boosted 00 black si · « **Reply #7 on:** July 21, 2009, 08:32:03 PM »

no obx junk!!!!!!!!!!!!! i made it

Robb · « **Reply #8 on:** July 21, 2009, 09:39:15 PM »

Ditch the synapse failure. Other than that, looks fun.

boosted 00 black si · « **Reply #9 on:** July 21, 2009, 11:08:01 PM »

i'm going to it failed once already they sent me a new one

AJxr · « **Reply #10 on:** July 23, 2009, 04:09:08 PM »

ive been thinking of making my own topmount for awhile. any more pics or info on it?

crxvtec91 · « **Reply #11 on:** July 23, 2009, 06:23:55 PM »

Quote from: boosted 00 black si on July 21, 2009, 08:32:03 PM

no obx junk!!!!!!!!!!!!! i made it

You made it or Jose?

boosted 00 black si · « **Reply #12 on:** July 23, 2009, 07:04:12 PM »

i mocked it all up n had my buddy weld it for me

jose didnt have a welder at the time

boosted 00 black si · « **Reply #13 on:** July 23, 2009, 07:10:32 PM »

never took any pics of it out the car sorry .. u could do it u just need someone that welds good..

AJxr · « **Reply #14 on:** July 23, 2009, 08:10:42 PM »

what material, migged or tigged?

AJxr · « **Reply #15 on:** July 24, 2009, 08:54:59 AM »

also are you using the probe wrist pins?

boosted 00 black si · « **Reply #16 on:** July 25, 2009, 04:47:58 PM »

its all tigged welded..n yes i'm using the probe wrist pins

b20beast · « **Reply #17 on:** July 25, 2009, 09:36:29 PM »

sick build
:yes:

boosted 00 black si · « **Reply #18 on:** July 25, 2009, 10:06:23 PM »

thanx

chris · « **Reply #19 on:** July 26, 2009, 12:54:38 AM »

Probe pistons are nice not very popular in the honda world.

marcj · « **Reply #20 on:** July 26, 2009, 03:29:51 AM »

looks nice.. does that RSX steering wheel fit with no mods? looks awesome. I want one!

boosted 00 black si · « **Reply #21 on:** July 26, 2009, 04:22:31 AM »

Quote from: chris M on July 26, 2009, 12:54:38 AM

Probe pistons are nice not very popular in the honda world.

yea i like them good pistons

boosted 00 black si · « **Reply #22 on:** July 26, 2009, 04:25:08 AM »

Quote from: marcj on July 26, 2009, 03:29:51 AM

looks nice.. does that RSX steering wheel fit with no mods? looks awesome. I want one!

yup fits with no mods u just have rewire ur horn thats it

AJxr · « **Reply #23 on:** July 26, 2009, 09:14:11 AM »

Quote from: chris M on July 26, 2009, 12:54:38 AM

Probe pistons are nice not very popular in the honda world.

im also running them in my build. word on the street is the wrist pins like to splinter up. so far ive got 20 minutes of idle time on my engine. we will see.

boosted 00 black si · « **Reply #24 on:** July 26, 2009, 09:42:14 AM »

That's bull shit I've been running these in my motor 4 3 years now this is my eveyday car I beat the shit out of it reving to 9000 rpm everyday never had not one problem.

AJxr · « **Reply #25 on:** July 26, 2009, 09:48:12 AM »

nice. i actually set out to build a b16. got forged probe 3.5cc dome pistons brand new for $240 shipped. and some tt b16 rods.

in a b16 they would have been 9.8:1 but i ended up using the b16 rods and the probe pistons an ls block/crank and the comp is like 8.6:1. just got her running last night im gonna go change the oil and take her for a drive.

you ever run your car? et? mph?

boosted 00 black si · « **Reply #26 on:** July 26, 2009, 11:05:56 AM »

this fucking pressure plate shit set me back but now i got the car up to 20psi so i'll be hitting the track soon with some slicks

chris · « **Reply #27 on:** July 26, 2009, 02:01:01 PM »

Probe use to be down the street from me back in the day. They have been building pistons for the v8 crowds since the early 80's

Rob.K · « **Reply #28 on:** July 26, 2009, 06:28:37 PM »

Build looks awesome. You need to add a real in front of that HMT on the intercooler though.

News:

Author Topic: my boosted SI (B!6a) (Read 5782 times)

chris

chris