Topic: new drag car (Read 41620 times)

hatchbone · « **on:** April 10, 2012, 12:29:00 AM »

parted out the hatch from the time i got my new car till the time very thing was parted and new shit purchased was about a week (crazy good deals) so ive wanted a s2000 for a while and i finally got one its a 2001 ap1 with ap2 2.2 swap, i also took my tires from my hatch and had them mounted on the stock 16's cause traction will be a issue all these parts i have already paid for and are going to be done and on the car in the next two to three weeks im still waiting for a couple things to show up

the car

my ford 8.8 rear end with eaton lsd and Richmond gear 3.96 ring and pinion and also all the custom fbm hardware to mount the rear, still waiting for drive axles from drive shaft supply should be here this week

my haltec plug and play joint also got the race pack just has not showed up yet

fmb shift knob for the new trans

trans adapter to accept the v160 supra gear box

custom twin disk for the conversion

getrag v160 gearbox

fbm shifter adapter

twin fbm 340's and pump hanger

fbm triple core radiator and fbm mount

fbm oil filter relocation bracket

for turbo i got a precision 6766jb t4 divided housing and also in the picture is my set of weld racing wheels along with the front skinnies, these are by far the dopest set of wheels i have ever owned. period

fbm billet plug cover for my new vc setup

stuff i cannibalized of my hatch are my 46mm waste gates, -12 fbm fuel lines fic 2150's and fbm reg also my catch can setup,along with a couple more small items

things not pictured cause im waiting for them to show up are drive axles, my 6point role cage and fbm 1000hp intercooler core. also i have the fbm head stud kit for the s2000 you guys know what head studs look like ,also fbm t4 divided duel 46mm turbo manifold made in house so when the cars there ill get some progress pics of that also all my piping and exhaust also in house this is just a update list the car should be back on the ground in the next two weeks

things i still need for a 700hp wheelie standing shit stomper is NOTHING lol all paid just waiting now so enjoy and i will update this thread as fast as it goes together

HiProfile · « **Reply #1 on:** April 10, 2012, 12:52:31 AM »

Is FBM sponsoring you, or you them? lol

Things can never be un-rhmt unless you pay someone else to do it. I wish I had the balls to drop $20k in a week. Looks good so far.

92CXyD · « **Reply #2 on:** April 10, 2012, 08:03:02 AM »

Living the dream, needs some more updates.

Are you guys going to race outside of Mn?

Like to to this at Bandimere outside of Denver June 9th.

Teg2boo · « **Reply #3 on:** April 10, 2012, 08:15:25 AM »

If I had infinite money to spend....

hatchbone · « **Reply #4 on:** April 10, 2012, 09:08:35 AM »

I call them my official,unofficial sponsor most the 9'sec s2000 in the country run there rearendvkits along with the v160 conversion,its like the one stop s2000 in the country I'm known them for years so it was a easy decision to make who I get my parts from lj at fbm has tuned my cars for close to 7yrs now and would give the shirt off there back to help me out,I will up date this over the next week or two I'm just waiting for the Eaton LSD and my drive axles then she gonna get stripped like a nogs bike and built to beast mode , looking to run mid 9's full weight a/c and my fat ass ,hatch was fun for the past ten years but I need to see what a wheelie is all about lol ,many updates to come

turbohf · « **Reply #5 on:** April 10, 2012, 10:06:30 AM »

no fuckin around.... i like it.

hatchbone · « **Reply #6 on:** April 10, 2012, 10:36:05 AM »

Sad to see my hatch stripped like a niggs bike but made it easy to get the parts I needed so it all works out in the end

crxvtec91 · « **Reply #7 on:** April 10, 2012, 11:28:59 AM »

Damn that is a sick build!!!

PhilStubbs · « **Reply #8 on:** April 10, 2012, 05:26:30 PM »

Damn, did you have a rich uncle die a month ago or something? Gonna be pretty serious

hatchbone · « **Reply #9 on:** April 10, 2012, 06:47:23 PM »

I paid 7.5 for the car all the parts you see I paid for when the hatch got parted,I only came out a pocket like a g

hatchbone · « **Reply #10 on:** April 10, 2012, 08:16:33 PM »

74mm yup ,I have a pile of boxes ten feet high lol just need this LSD and axles to show up and its on

turbohf · « **Reply #11 on:** April 10, 2012, 10:07:32 PM »

looks like you just walked around FBM taking pics like a wedding registry...

brine04 · « **Reply #12 on:** April 10, 2012, 11:16:00 PM »

I hope FBM fully blew you. Prob should have put in an auto but the 6spd will be fun on the street.

hatchbone · « **Reply #13 on:** April 10, 2012, 11:29:16 PM »

I was to lazy to pull my Shit out the boxes but ya I did walk around and take all the pics off the wall

hatchbone · « **Reply #14 on:** April 10, 2012, 11:31:31 PM »

auto trans would be dope I'm trying to best realstreet performances stock block record of 9.5 so if they can pull that Shit off I'm sure I will come close with enough seat time,if not sleeves and auto here I come lol

hatchbone · « **Reply #15 on:** April 12, 2012, 02:13:05 PM »

drive shaft and axles showed up today now just waiting on the lsd and ring gear and we all good for project strip down

crxvtec91 · « **Reply #16 on:** April 12, 2012, 02:15:43 PM »

Damn I cant wait to see more! Are you going to do anything to the motor? Maybe open the ring gaps a bit?

hatchbone · « **Reply #17 on:** April 12, 2012, 02:23:20 PM »

head studs and springs run the bitch till it blows then i might build it should be about 600-700 for this year if it holds together

bigdaddyvtec · « **Reply #18 on:** April 12, 2012, 05:17:32 PM »

It will make 600 all day especially on the e85... Not only det friendly, but cooler too.... Cant wait to see your big ass in the air like WHAT baby!

hatchbone · « **Reply #19 on:** April 12, 2012, 05:41:30 PM »

That be the goal

hatchbone · « **Reply #20 on:** April 12, 2012, 11:44:47 PM »

taking the stock wheel out and putting in my momo tuner series out the hatch and i got these so i can squeeze my big ass in and out when i get the cage in it in a couple weeks

Eggylshatch · « **Reply #21 on:** April 14, 2012, 06:15:13 PM »

are those just steering wheel quick disconnects? they look fancy whatever they are

hatchbone · « **Reply #22 on:** April 14, 2012, 07:15:31 PM »

ya they fuck ya though you have to buy the hub(black one) to bolt the quick connect to it (gold one)? why would they not just make it one piece, fuckin rape sauce it is, have to buy two pieces for one thing

Eggylshatch · « **Reply #23 on:** April 15, 2012, 05:37:17 PM »

Just rapin your wallet for all its worth!

hatchbone · « **Reply #24 on:** April 17, 2012, 03:08:22 PM »

Valve cover came today also the custom twin disk for the supra trans with hydro throw out bearing now I have it all but slicks for my drag rims lol almost there

92CXyD · « **Reply #25 on:** April 17, 2012, 05:02:39 PM »

Looks like you have a long road to go.

It is one thing to have all those beautiful parts, it is another to have them installed and working in perfect order.

So how soon is these parts going to be used in anger?

bigdaddyvtec · « **Reply #26 on:** April 17, 2012, 05:25:20 PM »

Quote from: 92CXyD on April 17, 2012, 05:02:39 PM

Looks like you have a long road to go.

It is one thing to have all those beautiful parts, it is another to have them installed and working in perfect order.

So how soon is these parts going to be used in anger?

I am going to refrain from my comment. Its too easy compared to the energy to type it.

hatchbone · « **Reply #27 on:** April 17, 2012, 07:01:25 PM »

I start tomorrow should have completed in two weeks, there is a reasoni have so many parts,so I'm not the guy who has to stop when I start,as stated above only thing I need is slicks all else is here

hatchbone · « **Reply #28 on:** April 17, 2012, 07:10:00 PM »

Oh ya and my 24's showed up today to donk this bitch right next to my cage ,that prob wont be in till the rest is done though

hatchbone · « **Reply #29 on:** April 18, 2012, 07:18:57 PM »

News:

Author Topic: new drag car (Read 41620 times)